1/2 in Superflex Jumper Cable with DIN Plug and DIN Right Angle Plug offer outstanding electrical performance along with high durability for tight routing and superior environmental sealing for ling life reliability.
1/2 in Superflex Jumper Cable with DIN Plug and DIN Right Angle Plug are used in areas that require extremely small bending radius such as between main feeders and antennas or between main feeders and RF equipment.
Connector 1: 7/16 DIN Male Right Angle
Connector 2: 7/16 DIN Male
Cable: 1/2 in superflex cable
Part Number: J12S-L-DM--DMRA Dimensions are in millimeters
According to IEC 60169-4
Characteristic Impedance 50ohm
Frequency Range DC-3GHz
Power return loss 0.8-1G ≥28 (VSWR=1.08)
1-2.2G ≥25 (VSWR=1.12)
2.2-3G ≥23 (VSWR=1.15)
PIM (@2-tone×20W) ≤-150dBc
Dielectric Withstanding Voltage ≥2500V RMS,50Hz,at sea level
Dielectric Resistance ≥5000MΩ
Durability Mating cycles ≥500 cycles
Material and plating
Body Brass Tri-alloy
Gasket Silicone Rubber -
Center conductor Brass Ag
Insulator PTFE -
Other Brass Ni
Temperature Range -40℃~+85℃
Rosh-compliance Full ROHs compliance
Salt-fog test 96h
1.ISO14001 certificate,ISO9001 certificate
2.All products are suit for ROHS.
3.CNC machines ,advanced test equipment
Coaxial Cables: 1/2", RG316, RG174, RG223, RG8, RG405, RG142, RG214, RG178, RG223, RG405, RG402, RG400, SF-104E, SF-102E, SF104, 3DFB, 1.37, IPEX(1.13), IPEX(1.17), MF086, MF141, MF142, LMR400, RF100A, QE3000.
Microwave Antenna: Ceiling, Indoor, Outdoor for Broad Band 2.4, 5.8 GHz, WI-FI/ GPRS, GPS and GSM/CDMA/3G tranking radio in high frequency.
HDG TELECOM provides the most comprehensive line of high performance, low loss cable, connectors & cable assemblies. Custom-designed product for demanding commercial and defense electronic are also available.
If you are going to consult the information about 1/2 in superflex rf coaxial cable assembly with din plug and din right angle plug, HDG telecom is one of the leading manufacturers and famous supplier, welcome to contact us.