50 Watts RF Terminator

50 Watts RF Terminator

50w RF dummy loads.
50 ohm.

Chat Now

Product Details


50w RF terminator 

HDG TELECOM DL-50W Series, convection-cooled Dry Dummy loads(Terminators) are offered with impedance values of 50 Ohm, those rf load are convection cooled.average power rate: 50 watts, our 50w coaxial dummy loads frequency are up to 3GHz(0-3000MHz)/6GHz/18GHz, the max VSWR for our typical RF terminators is 1.2:1, 1.15:1 or 1.1:1 is also available.

OEM is welcome, customized RF passives are available.

F}M4KIOKFFW7RTJO}NNCNWH.png

Product name:50W Termination load

Part #:DL-3G-50W-DINM

Frequency:DC-3000MHz(0-3GHz)

Impedance:50 ohms

Connector:7/16(DIN)-Male

Power:50W

Product name:50W Termination load

Part #:DL-3G-50W-NM

Frequency:DC-3000MHz(0-3GHz)

Impedance:50 ohms

Connector:N-Male

Power:50W

VSWR:≤1.2

Temperature:-55 to +80(deg)

Radiator:Aluminium,RoHS,IP65

Application:Indoor/outdoor use

VSWR:≤1.2

Temperature:-55 to +80(deg)

Radiator:Aluminium,RoHS,IP65

Application:Indoor/outdoor use

DL-3G-50W-DINM , DL-3G-50W-NM are 3GHz dummy load(terminators), they are wide used as microwave passive and RF site components.  This coax load terminator is manufactured with no chain and brass connector.  Our this 50 Ohm dummy loads item is convection aluminum Heatsink, RF Load frequency: 0-3000MHz, average power is up to 10 watts, the max SWR rate of rf terminators is 1.2, 1.15:1 or 1.1:1 is also available.

What are the  functions of RF dummy load?

1.When test a radio transmitter, a dummy load acts as protector of the transmitter. The transmitter may result in being damaged if there is no such a dummy load. An antenna is the normal load for the test, while a dummy load is the replacement of the antenna. A dummy load with 50 ohms gives your transmitter the proper resistance, protecting it at its final RF amplifier stage, so it is also called 50 ohm dummy load.

2.When test and adjust the transmitter, you may receive other radios signal on your test frequency, which can cause interference. The dummy load is able to avoid RF wave reflections which can cause distortion of information. As a result, you can get correct adjustments.In the same way, you won’t  QRM (artificial interference to transmission) others’ transmitter adjustment.

3.it is also used as a substitute of the loudspeaker during audio amplifier testing.

Note: Specifications can be changed according with customers' requirements.

Power: 1W, 2W, 5W, 10W, 15W, 20W, 25W, 30W, 50W, 100W, 200W, 300W, 500W 

Frequency: DC-3G, DC-6G, DC-8G, DC-12.5G ,DC-18G, DC-26.5G, DC-40G.

Connectors can be N-type, SMA-type, DIN-type, TNC-type and BNC-type.

HDG TELECOM offers: neutral host DAS and co-siting combiner solutions, hybrid couplers and hybrid matrices, attenuators, RF terminations, RF power splitter and diplexers, also known as cross band couplers.

Customized OEM/ODM is available, please contact us.

21L.png


Previous:1710~1785MHz 1805~1880MHz, GSM 1800 Duplexer Or Diplexer, SMA Female Connector Next:Cold Shrink Tubing For 1/2 In To Antenna Connection

Inquiry