Copper ground buss bars
Ground buss bars offer multiple ground points for equipment & tower grounding, and isolate electrical currents.The ground bar is made of electrolytic copper (T2 & C110 copper), and be pre-punched with holes (round & slotted). It is easily and quickly connected to lugs, and suitable for both indoor and outdoor application.
|Un-plated grounding bar||Tinned plated grounding bar|
Surface treatment is pickling passivation coated protectant.
|Surface treat with 5um thick tin-plated. And can pass salt spray test under 48 hours.|
# Available for two kinds of surface treatment, unplated and tin plated. (Nickel plated and silver flashing are also available by request).
# Available to be a kit which including stainless steel stand-off bracket and insulator.
# Customize requirement is welcomed.
Φ11mm x 4 pieces x 1 row
Φ8.5mm x 6 pieces x 1 rows
Φ11.1mm (slotted) x 5 pieces x 1 row
Φ10.5mm (slloted) x 10 pieces x 1 row
Φ10.5mm (slloted) x 13 pieces x 1 row
Φ10.5mm x 12pieces x 1 rows
Φ0.281" x 7 pieces x 2 rows
Φ9mm x 10 pieces x 2 rows
Φ11.1 (slotted) x 13 pieces x 2 rows
Φ11.1 (slotted) x 28 pieces x 2 rows
Φ11.1 x 9 pieces x 4 rows
Φ11.1mm x 17 pieces x 2 rows;
Φ6.35mm x 17 pieces x 2 rows
|Bent Ground Buss Bar|
In addition to usual ground buss bar, HDG Telecom also develop bent ground buss bar, this type widely used in the scene of rack, cell tower, and some network structure. Also this type support cutomized in length, width and height.
Bent ground buss bar have same application with usual type, and it doesn't need bracket, can using screws to install directly.