WT-RT-23 is a self-amalgamating ethylene propylene rubber (EPR) tape, also called high voltage insulation tape or splicing tape, used on solid dielectric cable for electrical insulation and jacketing in splices up to 69KV and for building stress cones in terminations up to 35KV. The tape comes with a separator that is removed during the taping process. Its 0.76mm thickness and quick amalgamation facilitates a rapid, void free insulation build-up that is electrically stable and moisture proof. WT-RT-23 is suitable for use with conductors rated at 90℃ with an emergency overload rating of 130℃. The tape is also resistant to corrosion, chemical and ultra violet light.
· Electrical insulation and jacketing in splices of solid dielectric cable up to 69KV.
· Building stress cones in terminations of solid dielectric cable up to 35KV.
· Jacketing of indoor terminations.
· Bus bar insulation and corrosion protection.
· Jacket repair and restoration in ally types of cable.
· Moisture sealing application.
Contact us for other sizes
|Thickness||0.76mm||ASTM D 4325|
|Tensile strength||>2.8MPa||ASTM D 4325|
|Elongation at break||>880%||ASTM D 4325|
|Fusion||Pass||ASTM D 4388|
|Operating Temp - continuous||90℃||ASTM D 4388|
|Operating Temp - emergency overload||130℃||ASTM D 4388|
|Dielectric Strength (KV/mm)||38.3||ASTM D 4325|
|Dielectric constant||After water immersion 24h@23℃||3||ASTM D 4325|
|After hot water immersion 24h@70℃||3.11||ASTM D 4325|
|Dissipation Factor||After water immersion 24h@23℃||0.0398||ASTM D 4325|
|After hot water immersion 24h@70℃||0.0314||ASTM D 4325|
|Volume resistivity||96h@23℃, 50%RH||1 X 1016 Ω.CM||ASTM D 4325|
|96h@23℃, 96%RH||1 X 1016 Ω.CM||ASTM D 4325|
|Water absorption||0.13%||ASTM D 4325|
|Copper corrosion||Pass||ASTM D 69-06|
|Ozone resistance||Pass||ASTM D 4388|
|UV resistance||Pass||ASTM D 4388|
|Heat exposure||Pass at 130℃||ASTM D 4388|
|Xenon-arc exposure @1008h||Pass||ASTM D 4388|
You might also interested in:
Rubber Mastic Tape