| Introduction |
Multi-diameter sealing modules (changeable diameter block with center plugs) consist of two halves. It is made of rubber with removable layer and a center core that enable perfect to fit a wide range of a cable or a pipe. Adjustable diameter blocks’ cross section is square. SM sealing modules and LM sealing modules two series are available for choices. LM sealing solution are based on 60mm depth, SM component seal are based on 30mm depth. |
Here are the specific specifications：
 Styles: with center plugs Depth: 30mm Matchable cable range: 3-54mm Material: 100%EPDM |
| Part No: | Number of cables | cable/pipe diameter(mm) | Extermal size |
| MDS-M-SM15 | 1 | 3-11 | 15*15*30 |
| MDS-M-SM1540 | 3 | 3.5-10.5 | 15*40*30 |
| MDS-M-SM20 | 1 | 4-14.5 | 20*20*30 |
| MDS-M-SM2040 | 2 | 3.5-16.5 | 20*40*30 |
| MDS-M-SM30 | 1 | 10-25 | 30*30*30 |
| MDS-M-SM40 | 1 | 21.5-34.5 | 40*40*30 |
| MDS-M-SM40 10-32 | 1 | 9.5-32.5 | 40*40*30 |
 Styles: with and without center plugs Depth: 60mm Matchable cable range: 3-99mm Material: 100%EPDM |
| Part No: | Number of cables | cable/pipe diameter(mm) | Extermal size |
| MDS-M-LM15 | 1 | 3-11 | 15*15*60 |
| MDS-M-LM1540 | 3 | 3.5-10.5 | 15*40*60 |
| MDS-M-LM20 | 1 | 4-14.5 | 20*20*60 |
| MDS-M-LM2040 | 2 | 3.5-16.5 | 20*40*60 |
| MDS-M-LM30 | 1 | 10-25 | 30*30*60 |
| MDS-M-LM40 | 1 | 21.5-34.5 | 40*40*60 |
| MDS-M-LM40 10-32 | 1 | 9.5-32.5 | 40*40*60 |
| MDS-M-LM60 | 1 | 28-54 | 60x60x60 |
| MDS-M-LM60 24-54 | 1 | 24-54 | 60x60x60 |
| MDS-M-LM90 | 1 | 48-71 | 90x90x60 |
| MDS-M-LM120 | 1 | 67.5-99 | 120x120x60 |
Solid compensation modules take the place of LM or SM modules, space reserved for future changes and save cost. Application: cable or pipe sealing. Feature: space reserved for future changes and save cost. Material: 100%EPDM |
| Part No: | External dimension(mm) Height x Width x Depth |
| MDS-SCM-LM05120 | 5*120*60 |
| MDS-SCM-LM10120 | 10*120*60 |
| MDS-SCM-LM15 | 15*15*60 |
| MDS-SCM-LM20 | 20*20*60 |
| MDS-SCM-LM30 | 30*30*60 |
| MDS-SCM-LM40 | 40*40*60 |
| MDS-SCM-LM60 | 60*60*60 |
Solid corner compensation module kits for SRC frames |
| Part No: | Numbers of modules / kit | External dimension(mm) Height x Width x Depth |
| MDS-SCM-LM20RC | 4 modules kit | 20x20x60 |
| MDS-SCM-LM20RC | 4 modules kit | 40x40x60 |
