The BNC (Bayonet Neill–Concelman) connector is a miniature quick connect/disconnect radio frequency connector used for coaxial cable. It features two bayonet lugs on the female connector; mating is fully achieved with a quarter turn of the coupling nut. BNC connectors are used with miniature-to-subminiature coaxial cable in radio, television, and other radio-frequency electronic equipment, test instruments, and video signals. The BNC was commonly used with 10BASE2 computer networks. BNC connectors are made to match the characteristic impedance of cable at either 50 ohms or 75 ohms. They are usually applied for frequencies below 4 GHz and voltages below 500 volts.
Part Number: CRK-BNCM-R58
Dimensions are in millimeters
Dielectric withstanding valtage
≥1500V RMS, 50Hz, at sea level
Center Contact ≤2.5mΩ
Outer Contact ≤1.0mΩ
Mating cycles ≥500 cycles
|Apply with the cables||RG58 cable|
Full ROHs compliance
≥500 mating cycles
Material and plating
1.CNC machines ,advanced test equipment.
2.All products are suit for ROHS.
3.ISO14001 certificate,ISO9001 certificate
HDG TELECOM’s BNC connector is a miniature quick connect/disconnect RF connector. It features two bayonet lugs on the female connector; mating is achieved with only a quarter turn of the coupling nut. BNC are ideally suited for cable termination for miniature to subminiature coaxial cable (RG-58, RG-59 to RG-179,RG-316 etc.).
F Type Lightning Arrester
4.3-10 Dust Cap
N Crimp Connector