The BNC (Bayonet Neill–Concelman) connector is a miniature quick connect/disconnect radio frequency connector used for coaxial cable. BNC connector features two bayonet lugs on the female connector; mating is fully achieved with a quarter turn of the coupling nut. BNC connectors are used with miniature-to-subminiature coaxial cable in radio, television, and other radio-frequency electronic equipment, test instruments, and video signals. The BNC was commonly used with 10BASE2 computer networks. BNC connectors are made to match the characteristic impedance of cable at either 50 ohms or 75 ohms.
Part Number: CRK-BNCM-R214 | Dimensions are in millimeters | |||
Interface | ||||
According to | IEC 60169-8 MIL-C-39012 | |||
Electrical | ||||
Characteristic Impedance | 50 ohm | |||
Frequency Range | DC-2GHz | |||
VSWR | ≤1.2 | |||
Dielectric withstanding voltage | ≥1500V | |||
Dielectric Resistance | ≥5000MΩ | |||
Contact Resistance | Center Contact ≤1.5mΩ | |||
Outer Contact ≤1mΩ | ||||
Mechanical | ||||
Durability | Mating cycles ≥500 cycles | |||
Environmental | ||||
Temperature Range | -40℃~+85℃ | |||
Watertightness | IP67 | |||
RoHS-compliance | Full ROHs compliance | |||
Salt-fog test | 96h | |||
Material and plating | ||||
Part Name | Material | Plating | ||
Body | Brass | Ni | ||
Insulator | PTFE | - | ||
Center conductor | Brass | Au | ||
Other | Brass | Ni | ||
1.CNC machines ,advanced test equipment.
2.All products are suit for ROHS.
3.ISO14001 certificate,ISO9001 certificate.
We test each item before shipment to ensure they are in good condition. We offer you fast shipping, usually around 7-10 days preparation. (This is an approximate time, your shipping day would be up to your exact quantity).Free samples are available for your to test. We would let you know the tracking number once we have delivered your products.
4.3-10 Crimp Connector |  N Right Angle Connector |  NEX10 Connector |
