| Product Description |
RG8 (LMR400 and CNT4000 cable assembly jumper with N Male Plug connector are used in areas that require extremely small bending radius such as between main feeders and antennas or between main feeders and RF equipment.
RG8 cable assembly jumper with N Male connector offer outstanding electrical performance along with high durability for tight routing and superior environmental sealing for ling life reliability. Jumper cables are designed and produced to have features as below
Features/Benefits
High pull-off strength
Excellent V.S.W.R performance.
Low and stable intermodulation.
Weatherproof
Part Number: JKR8-L-NM--NM | Dimensions are in millimeters | |||
Interface | ||||
According to | IEC 60169-4 | |||
Electrical | ||||
Characteristic Impedance | 50ohm | |||
Frequency Range | DC-3GHz | |||
VSWR | ≤1.12 | |||
Dielectric Withstanding Voltage | ≥2500V RMS,50Hz,at sea level | |||
Dielectric Resistance | ≥5000MΩ | |||
Mechanical | ||||
Durability | Mating cycles ≥500 cycles | |||
Material and plating | ||||
Part Name | Material | Plating | ||
Body | Brass | Tri-alloy | ||
Gasket | Silicone Rubber | - | ||
Center conductor | Brass | Ag | ||
Insulator | PTFE | - | ||
Other | Brass | Ni | ||
Environmental | ||||
Watertightness | IP68 | |||
RoHS-compliance | Full RoHS compliance | |||
Salt-fog test | 96h | |||
Temperature Range | -40℃~+85℃ | |||
1.ISO14001 certificate,ISO9001 certificate.
2.All products are suit for ROHS.
3.CNC machines ,advanced test equipment.
You can select the N cable assemblies that have any combination of the following specifications: standard or custom length, centimeters or inches, REACH, RoHS or non-RoHS, bulkhead or standard mount, standard polarity, right angle or straight connectors, and 50 Ohm impedance. Coaxial cable assemblies are 100% continuity tested and full RF testing is available.
| Related Products |
 Weatherproofing Boot |  Cold Shrink Tube |  Gel Seal Closure |
