Single hole type feeder clamp, also called single hanger kit, is a pre-assembled kit to fix and manage the RF coaxial cables on wireless cell towers.
Each set of feeder clamp include:
----1. One stainless steel 304 C-shaped angle dapter.
----2. Plastic polypropylene cable block hangers, single/double/triple stacks.
----3. Threaded rod & nut & washers.
C-shaped angle adapter is to be mounted to 1-25mm flat steel, 90 degree angle steel or rectangular steel.
Each stack of cable block hanger can hold one run cable. The feeder clamp can be assembled with 1/2/3 stacks cable block hangers, to fix 1/2/3 runs cable.
Item No | Applicable Cable OD (mm) | Nominal Cables |
CC-S7-X | 6.0-8.0 | GPS feeder cable, MW IF cable |
CC-S7.6-X | 7-8.0 | LMR-300, CNT-300, 5D-FB |
CC-S14-X | 9.7 | 1/4, 7D-FB |
CC-S38-X | 9.7-11.2 | LMR-400, CNT-400, RG8, 3/8'', 3/8''S |
CC-S12S-X | 13-14 | 1/2''S |
CC-S12-X | 16-17 | 1/2 |
CC-S18.2mm-X | 18.2-19.0 | / |
CC-S22mm-X | 21.8-22.8 | / |
CC-S23.5mm-X | 23.2-24.2 | / |
CC-S78-X | 27-28 | 7/8'' |
CC-S114-X | 39-40 | 1-1/4'' |
CC-S158-X | 50-52 | 1-5/8'' |
X on the item no stands for the cable run number. X=1 by 1 cables, X=2 by 2 cables, X=3 by 3 cables
![]() Single Hole Coax Support Block Item No: CB-XX-SH Size:1/4", 3/8", 1/2"S, 1/2", 7/8", 1-1/4", 1-5/8" etc. or use with grommet rubber for different size cable freely. Material: PP Type: 1 way Used for trunk line and coax cable. |
Hot product recommendation:
![]() HUAWEI 27150113 Cable Fixing Clip Item No: CC-S7-2 Used for GPS feeder cable and MW IF cable. Material: Stainless Steel+PP. Recommend applicable cable OD: 7.0-8.0mm |
Our feeder clamp can fit with the main brands of feeder cable: all brands cable include: CommScope (Andrew), Amphenol, HUBER+SUHNER, Rosenberger, Times Microwave, Acome, Leoni, Eupen, RFS, NK Draka, Hansen, Bleden, LG/LS Cable, Trilogy, Times Microwave...etc.